Our Projects
Our Projects References
Our projects references includes but is not limited to
Gaslink
GAS DISTRIBUTION SYSTEM
- CL150 Metering Systems Upgrade
- Location: Lagos Mainland, Nigeria
The Upgrade of 5 PRMSs with Prepaid Metering Systems
Project
The Upgrade of 5 PRMSs with Prepaid Metering Systems
Estimated Gas Volume
>= 12000 Scmh down to 700 Scmh
Project Scope
The Client identified the need to upgrade some of its existing pressure reduction and metering stations to stations with additional capabilities to meets its identified operational need which are not limited to deployment of Coriolis Metering Technology on the PRMS, PRMS with independent solar power system with battery capacity of 7 days of operation without charging and a credit management platform/system for the deployment of proposed prepaid metering solution on the PRMS
Location
Lagos Mainland, Nigeria
Project Objective
The objective of this project was to carry out activities for the replacement of the PRMSs at the identified customer locations to internationally accepted industry codes and standards as listed below:
- Safely Decommission, retrieve the existing PRMSs and appurtenances from their various location and transport same to Client’s warehouse
- Engineering, Procurement, Pre-fabrication, Installation and Commissioning 5 numbers PRMSs with Pre-paid Metering capabilities with Coriolis Metering Technology deployed, inclusive of independent Solar system while adhering to all quality requirements.
SHELL NIGERIA GAS
Gas Distribution System
- CL300 PRS – Industrial
- Location: Ogun, Nigeria
SHELL NIGERIA GAS
Project
Gas Distribution System
CL300 PRS – Industrial
Estimated Gas Volume
>= 3.0 mmscfd
Location
Ogun State, Nigeria
Description
The Customer Station (CS) is the last equipment or facility in the gas transmission chain to industrial customers. The CS is basically a small pressure reduction and metering station. The inlet pressure is 22barg while the outlet pressure ranges between 1 – 3 bar. Consequently, the pressure reduction is critical. The generic CS consists of two identical streams; each having a gas delivery capacity of a maximum of 3MMscf/d and a minimum of 0.07MMScf/d at 22barg inlet pressure. Despite the dual stream design, the components of the CS are arranged such that the equipment has a minimal footprint yet allowing for easy maintenance and operations.
FALCON GROUP
Gas Distribution System
- CL150 Metering Skids
- Location: Lagos, Nigeria
Falcon Group
Project
Gas Distribution System
CL150 Metering Skids – Industrial – 2015
Estimated Gas Volume
>= 3.96 mmscfd
Location
Industrial Sites in Ikorodu, Nigeria
Description
Zennergy West Africa in collaboration with its associates designed, built and commissioned the Metering Skids at various sites in Ikorodu
ZIL GAS TANZANIA
Gas Distribution System
- CL600 High Pressure PRMS
- Location: Dar eS Salaam, Tanzania
GOODWILL CERAMICS
Project
CL600 High Pressure PRMS (90 bar)
Estimated Gas Volume
>= 20 mmscfd
Location
Mtwara, Tanzania
Description
Zennergy West Africa in collaboration with its UK and Tanzanian technical associates provided the gas infrastructure turnkey solution to supply gas to Goodwill Ceramics Factory under the agreement with TPDC, ZIL GAS Systems and Goodwill Ceramics Factory
Matola Gas Mozambique
Gas Distribution System
- CL900 LETDOWN FUEL GAS SYSTEM
- Location: Ressano Garcia
CL900 letdown Fuel Gas System
Project
CL900 1st stage letdown Fuel Gas System and 2nd stage CL300 Metering to 110MW Power Plant
Estimated Gas Volume
>= 28 mmscfd down to 14 mmscfd
Location
Ressano Garcia, Mozambique
Description
Zennergy West Africa in association with its technical associates provided the complete gas infrastructure Reduction and Metering Station to supply gas to the 100 MW Power Generating Plant under the agreement with Matola Gas and Zennergy International Limited turn-key solution via a Pressure The inlet pressure typically ranges from 80 to 120 barg; the inlet temperature of the gas was typically around 30 degrees Centigrade; the station flow range was designed to flow a maximum of 28 mmscfd.
NDPHC
Gas Distribution System
- The Repair and Maintenance of CL300 Fuel Gas System
- Benin, Edo State, Nigeria
GAS DISTRIBUTION SYSTEM
Project
Gas Distribution System
The Repair and Maintenance of CL300 Fuel Gas System – Pressure Regulation with Metering System
Estimated Gas Volume
>= 1 mmscfd
Location
Benin, Edo State, Nigeria
Description
Instrument and Fuel Gas Skid for a Gas-fired Boiler Package at Ihovbor Power Plant GMS under agreement
Get Quotation
Get QUotation & Make An Offer
- Easy Form Fill
- Online Reservation
- Fast For Responding